 |
| Quantity: | |
|---|---|
VSE-11
YUJIAN
Specification and impulse constant
Type | Catalogue | Reference voltage | Rated current | Impulse constant |
| VSE-11 | Postpaid | 230V | 10(100)A | 800 imp/kWh |
Accuracy level: class 1
--Active energy: Class 1
Rated voltage 230V
Rated current 10A
Rated frequency 50Hz
Clock precision: ≤ ± 0.5 seconds/day
Shape size 200mm´112mm´71mm（includes big meter end size）
Weight about 0.75kg (without pluggable module )
Start The meter can continue to measure electricity in the condition of rated voltage, rated frequency and when power factor is1 and the loading current is 0.4%Ib (class1).
Creeping When adding 115% rated voltage and current loop is disconnected, there
isn’t any electrical energy pulse output.
Basic error (see the following table)
Loading current | Power factor | Basic error (%) 1.0 class |
0.05Ib~ Imax | 1.0 | <±0.6 |
Electric parameters
Operation voltage | 0.7 Un≤U≤1.2 Un | ||
Voltage line power consumption | 10(100)A | ≤ 2W，10VA（single phase） | |
Current line power consumption | 10(100)A | ||
with power carrier module(non-read the meter) | Voltage line power consumption | 10(100)A | ≤ 2W，10VA（single phase） |
Current line power consumption | 10(100)A | ＜4VA（single phase） | |
without module | Backup battery lifespan | ||
with power carrier module | Backup battery lifespan | ＞1year | |
Backup battery parameter | 3.6VDC 2600mAh | ||
Battery outages current | ≤100µA | ||
Climate condition
0℃～+50℃ | |
0℃~+70℃ | |
-25℃～+80℃ | |
≤85% |
Technical parameters
Measurement range | 10(100)A | ||
Displaying | LCD | ||
Communication baud rate
Serial interface baud rate | 1200bps 7bits data even parity check |
Specification and impulse constant
Type | Catalogue | Reference voltage | Rated current | Impulse constant |
| VSE-11 | Postpaid | 230V | 10(100)A | 800 imp/kWh |
Accuracy level: class 1
--Active energy: Class 1
Rated voltage 230V
Rated current 10A
Rated frequency 50Hz
Clock precision: ≤ ± 0.5 seconds/day
Shape size 200mm´112mm´71mm（includes big meter end size）
Weight about 0.75kg (without pluggable module )
Start The meter can continue to measure electricity in the condition of rated voltage, rated frequency and when power factor is1 and the loading current is 0.4%Ib (class1).
Creeping When adding 115% rated voltage and current loop is disconnected, there
isn’t any electrical energy pulse output.
Basic error (see the following table)
Loading current | Power factor | Basic error (%) 1.0 class |
0.05Ib~ Imax | 1.0 | <±0.6 |
Electric parameters
Operation voltage | 0.7 Un≤U≤1.2 Un | ||
Voltage line power consumption | 10(100)A | ≤ 2W，10VA（single phase） | |
Current line power consumption | 10(100)A | ||
with power carrier module(non-read the meter) | Voltage line power consumption | 10(100)A | ≤ 2W，10VA（single phase） |
Current line power consumption | 10(100)A | ＜4VA（single phase） | |
without module | Backup battery lifespan | ||
with power carrier module | Backup battery lifespan | ＞1year | |
Backup battery parameter | 3.6VDC 2600mAh | ||
Battery outages current | ≤100µA | ||
Climate condition
0℃～+50℃ | |
0℃~+70℃ | |
-25℃～+80℃ | |
≤85% |
Technical parameters
Measurement range | 10(100)A | ||
Displaying | LCD | ||
Communication baud rate
Serial interface baud rate | 1200bps 7bits data even parity check |
